 |
| Quantity: | |
|---|---|
WB-OD-F
Webitelecomms
9403200000
POLE/WALL MOUNTING IP55 OUTDOOR ENCLOSURES
WB-OD-P follows the IEC's standardized International Protection Code system for measuing capabilities.
The IP Code reflects the degree of protection as "IP" followed by two numbers;
the first digit shows the extent to which enclosures are protected against particles/dust, and protection to others from enclosed hazards.
The second digit indicates the extent of protection against water.
We carry it at IP55 enclosures which meet below characteristics
Protection from dirt, dust, oil, and other non-corrosive material
Complete protection from contact with enclosed equipment
Available in aluminum, carbon steel, and stainless steel
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Engraving, silk-screening, or anodizing services available
Custom with cutouts, insulation,cooling system, hinges, latches, or locks
This is a basic single wall type wall mount outdoor cabinet design to keep your equipment from water and dust.
OD-F model specifications
The enclosed design provided ensures protection of network devices from water infiltration.
Features include a bottom cabling entrance and cooling fan (only for IP55 models).
Material options include SPCC cold rolled steel, stainless steel, and galvanized steel.
The IP rate can be either IP65 or IP55.
The cabinet is waterproof and dustproof, capable of resisting materials such as dirt, oils, and non-corrosive substances.
A strict rubber sealing belt is implemented.
The cabinet includes a rear wall mounting kit consisting of 4 units.
This cabinet is a dedicated solution for machine protection, designed to safeguard against human damage, earthquakes, and other potential hazards.
A yellow-green earthing cable is provided for the front door.
The cabinet supports a maximum static loading of 60 KGS.
USUAL SIZES
Width: 600 mm
Depth: 600,450 mm
Height: 4U, 6U, 9U, 12U, 15U, 18U, 22U, 27U,OEM
Customized size is available
WELD STRUCTURE SUGGESTED !
Industry Standard and Material:
Comply with
ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
Surface Finish:Degrease, acgoods_id pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating
Materials:SPCC cold rolled steel or EG steel
Thickness:
Mounting profile:1.5 mm
others:1.00 mm to 1.20 mm
IP degree: IP-65 or IP-55
Loading capacity: Max Static loading---60 KG
Body color:RAL9005(black);RAL7035(grey),etc
LISTING
| Width×Depth×Height | Width×Depth×Height |
| 600×450×6U mm | 600×600×6U mm |
| 600×450×9U mm | 600×600×9U mm |
| 600×450×12U mm | 600×600×12U mm |
| 600×450×15U mm | 600×600×15U mm |
| 600×450×18U mm | 600×600×18U mm |
POLE/WALL MOUNTING IP55 OUTDOOR ENCLOSURES
WB-OD-P follows the IEC's standardized International Protection Code system for measuing capabilities.
The IP Code reflects the degree of protection as "IP" followed by two numbers;
the first digit shows the extent to which enclosures are protected against particles/dust, and protection to others from enclosed hazards.
The second digit indicates the extent of protection against water.
We carry it at IP55 enclosures which meet below characteristics
Protection from dirt, dust, oil, and other non-corrosive material
Complete protection from contact with enclosed equipment
Available in aluminum, carbon steel, and stainless steel
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Engraving, silk-screening, or anodizing services available
Custom with cutouts, insulation,cooling system, hinges, latches, or locks
This is a basic single wall type wall mount outdoor cabinet design to keep your equipment from water and dust.
OD-F model specifications
The enclosed design provided ensures protection of network devices from water infiltration.
Features include a bottom cabling entrance and cooling fan (only for IP55 models).
Material options include SPCC cold rolled steel, stainless steel, and galvanized steel.
The IP rate can be either IP65 or IP55.
The cabinet is waterproof and dustproof, capable of resisting materials such as dirt, oils, and non-corrosive substances.
A strict rubber sealing belt is implemented.
The cabinet includes a rear wall mounting kit consisting of 4 units.
This cabinet is a dedicated solution for machine protection, designed to safeguard against human damage, earthquakes, and other potential hazards.
A yellow-green earthing cable is provided for the front door.
The cabinet supports a maximum static loading of 60 KGS.
USUAL SIZES
Width: 600 mm
Depth: 600,450 mm
Height: 4U, 6U, 9U, 12U, 15U, 18U, 22U, 27U,OEM
Customized size is available
WELD STRUCTURE SUGGESTED !
Industry Standard and Material:
Comply with
ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
Surface Finish:Degrease, acgoods_id pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating
Materials:SPCC cold rolled steel or EG steel
Thickness:
Mounting profile:1.5 mm
others:1.00 mm to 1.20 mm
IP degree: IP-65 or IP-55
Loading capacity: Max Static loading---60 KG
Body color:RAL9005(black);RAL7035(grey),etc
LISTING
| Width×Depth×Height | Width×Depth×Height |
| 600×450×6U mm | 600×600×6U mm |
| 600×450×9U mm | 600×600×9U mm |
| 600×450×12U mm | 600×600×12U mm |
| 600×450×15U mm | 600×600×15U mm |
| 600×450×18U mm | 600×600×18U mm |
